Zniffer / Advanced Radio Tool installation guide

The new Zniffer / Advanced Radio Tool works with Z-Uno 2 and RaZberry 7 (standard and Pro)

To start using the tools please follow few steps:

Upgrade your Z-Uno 2

Install the Arduino IDE. You will need to install the beta path (step 4 in the guide)

Go in Tools > Board > Board Manager, select Z-Wave.Me Z-Uno2 > 3.0.9 > Install

Once done, plug the Z-Uno 2. Windows users might need to install a driver.

In Tools menu select the board and the programmer (Z-Uno 2G). Then do Tools > Burn bootloader to update your Z-Uno 2 firmware.

You Z-Uno 2 is up to date now!

Upgrade your RaZberry 7

Upgrade your RaZberry 7 firmware to version 7.26 or upper using Z-Way or ZMESerialUpdater tool.

RaZberry 7 with PTI port can run in receive only mode (PTI mode) while still working as a Z-Wave controller (with Z-Way or any other third party sowtware), second UART is needed in that case. In Modem mode RaZberry 7 stops serving the controller functionality and switches to Zniffer/A.R.T. only mode

Run the Advanced Ratio Tool

Download and start the Zniffer / Advanced Ratio Tool.

Currently only Windows 10 x64 and upper, Debian Buster x64 and upper, Ubuntu Linux 20.04 LTS x64 and upper and Mac OS X are supported.

Press [+] - the port will be auto-selected (or choose the port).

Press [i] and copy the Device UUID and send to the Z-Wave.Me Team to get a license and enter it in the License field. Press [Apply].

Then select the frequency, press [Start] and [Trace].