Many users ask us if it is possible to switch from their Popp Hub 2 to Z-Wave.Me firmware. Yes, it is and it is absolutely free!
- Make a backup.
Enter your UUID and
🛈 The UUID can be found on the controller back or in Expert UI (http://IP:8083/expert) → Network → Controller Info → UUID
Reboot your controller with internet cable connected: remove the mounting frame, unplug the power cable and use it to push in the reset button
🛈 The reset button is located in the hole near the corner of the Ehternet port. It is white compared to other brown buttons.
Plug the power cable back. Wait 5 minutes and use your browser to connect to your upgraded Hub. You can use find.z-wave.me to locate your Hub IP address.
⚠ Your Wi-Fi network will change from Popp-xxxx to Z-Wave.Me-xxxx
⚠ Make sure to clear browser cache and cookies before opening the Hub user interface.
Enjoy your Z-Wave.Me Hub and feel free to contact us on email@example.com or firstname.lastname@example.org