Relay Switch (obsolete)

FGS-211

110-230V AC, 24-60V DC

16A AC 10A DC

3kW

1

16A with AC 10A with DC

1.5kW

2

Reaction to Alarm Frame

Z-Way HCL-HC2 Yubii-HC3

None

Relay (Basic), Dimmer (SwitchMultilevel)

Double Relay Switch (obsolete)

FGS-221

110-230V AC, 24-60V DC

8A AC 8A DC

1.5kW

2

8A with AC 8A with DC

1.5kW

2

Reaction to Alarm Frame

Z-Way HCL-HC2 Yubii-HC3

None

Relay (Basic), Dimmer (SwitchMultilevel)

Relay Switch (obsolete)

FGS-212

100-240V AC

10A

2.5kW

1

10A

2.5kW

2

Reaction to Alarm Frame

Z-Way HCL-HC2 Yubii-HC3

None

Relay (Basic), Dimmer (SwitchMultilevel)

Double Relay Switch (obsolete)

FGS-222

100-240V AC

10A

2.5kW

2

6,5A

1.5kW

2

Reaction to Alarm Frame

Z-Way HCL-HC2 Yubii-HC3

None

Relay (Basic), Dimmer (SwitchMultilevel)

Single Switch 2 (obsolete)

FGS-213

100-240V AC

10A

2.5kW

1

10A

2.5kW

2

Reaction to Alarm Frame

Z-Way HCL-HC2 Yubii-HC3

None, S0

Relay (Basic), Dimmer (SwitchMultilevel)

Double Switch 2 (obsolete)

FGS-223

100-240V AC

10A

2.5kW

2

6,5A

1.5kW

2

Reaction to Alarm Frame

Z-Way HCL-HC2 Yubii-HC3

None, S0

Relay (Basic), Dimmer (SwitchMultilevel)

Smart Module

FGS-214

100-240V AC, 24-30V DC

6,5A

2.5kW

1

6,5A

2.5kW

2

Reaction to Alarm and SmartStart frames

Z-Way HCL-HC2 Yubii-HC3

None, S0, S2‑unauthenticated, S2‑authenticated

Relay (Basic), Dimmer (SwitchMultilevel)

This relay is an ideal balance of the ratio of size, price and functionality. It is especially recommended to use this relay in conjunction with other similar relays and dimmers from fibaro. Despite the presence of one channel, it is possible to connect 2 keys at once. 1 will control the load, and the second can control the associated devices or be as a scene controller that will send information to the controller about the number of clicks and the status of the second key. For example, you can add a dimmer to a group of associations and control its brightness and status using an additional button of this relay

Double Smart Module

FGS-224

100-240V AC, 24-30V DC

9.5A

2.1kW

2

6A

1.4kW

2

Reaction to Alarm and SmartStart frames

Z-Way HCL-HC2 Yubii-HC3

None, S0, S2-unauthenticated, S2-authenticated

Relay (Basic), Dimmer (SwitchMultilevel)

This relay is an ideal balance of the ratio of size, price and functionality. It is especially recommended to use this relay in conjunction with other similar relays and dimmers from fibaro. This device can control two loads at once without losing the functionality of the scene controller. For example, with the help of two such relays and mutual associations, you can make a system of pass-through switches for 2 loads without crushing the wall.

Switch Module with meter

PAN-03

100 - 240V AC

11A

2.6kW

1

11A

2.6kW

2

Zero-Cross

Z-Way HCL-HC2 Yubii-HC3 On Fibaro controllers need add singlechannel accociation from group 2, 3 to home center

None, S0

No

This module is a very simple and budget-friendly solution. This relay will ideally manifest itself as a final actuator that will be controlled only from a controller or a bistable switch. Unfortunately, you will not be able to configure associations from this device, also when using a monostable switch, the button must be clamped for more than 0.1 seconds for it to change its state. Thanks to the power consumption measurement function, you can measure the amount of energy spent passing through the relay and know the voltage of your network. Also thanks to the zero-cross function

Dual Switch Module with meter

PAN-04

100 - 240V AC

6.5A

1.5kW

2

6.5A

1.5kW

2

Zero-Cross

Z-Way HCL-HC2 Yubii-HC3 Work only on z-wave engine v2.0 On Fibaro controllers need add singlechannel accociation from group 2, 3 to home center

None, S0

No

This module is a very simple and budget-friendly solution. This relay will ideally manifest itself as a final actuator that will be controlled only from a controller or a bistable switch. Unfortunately, you will not be able to configure associations from this device, also when using a monostable switch, the button must be clamped for more than 0.1 seconds for it to change its state. Thanks to the power consumption measurement function, you can measure the amount of energy spent passing through the relay and know the voltage of your network. Also thanks to the zero-cross function

In Wall Single relay (1 way) switch module

PAN-05

100 - 240V AC

11A

2.6kW

1

11A

2.6kW

2

Z-Way HCL-HC2 Yubii-HC3 On Fibaro controllers need add singlechannel accociation from group 2, 3 to home center

None, S0

No

This module is a very simple and budget-friendly solution. This relay will ideally manifest itself as a final actuator that will be controlled only from a controller or a bistable switch. Unfortunately, you will not be able to configure associations from this device, also when using a monostable switch, the button must be clamped for more than 0.1 seconds for it to change its state

Dual relay (1 way) switch module

PAN-06

100 - 240V AC

6.5A

1.5kW

2

6.5A

1.5kW

2

Z-Way HCL-HC2 Yubii-HC3 Work only on z-wave engine v2.0 On Fibaro controllers need add singlechannel accociation from group 2, 3 to home center

None, S0

No

This module is a very simple and budget-friendly solution. This relay will ideally manifest itself as a final actuator that will be controlled only from a controller or a bistable switch. Unfortunately, you will not be able to configure associations from this device, also when using a monostable switch, the button must be clamped for more than 0.1 seconds for it to change its state

Z-Wave Relay Switch quinto

HE-RS01

85-265V AC, 24-48V DC

5

5A

1.2kW

5

Zero-Cross, SmartStart, 2 channels can be used to control curtains

Z-Way HCL-HC2 Yubii-HC3

None, S0, S2‑unauthenticated, S2‑authenticated

Relay (Basic), Dimmer (SwitchMultilevel)

A very multifunctional device, the main advantage is the presence of 5 relays divided into 2 groups with a common point (3 and 2). Which allows one device to control 3 groups of lights and blinds control. Also, this device is often used in conjunction with servos to configure heating systems with a comb in the boiler room

Z-Wave High Load Switch

HE-HLS01

85-265V AC, 24-48V DC

16A

4kW

1

16A

4kW

1

Zero-Cross, SmartStart, external NTC connection, operation in thermostat mode

Z-Way HCL-HC2 Yubii-HC3

None, S0, S2‑unauthenticated, S2‑authenticated

Relay (Basic), Dimmer (SwitchMultilevel)

This device can work in two modes, if you add it to the network with a double click, the device will be added as a thermostat, in this mode this device is ideal for controlling electric underfloor heating. With a triple click, this device will be added to the network as a regular relay, so heavy loads can be controlled

Flush 1 Relay

ZMNHAD

110-240V AC, 24-30 V DC

1

3

It is possible to connect an external temperature sensor ds18b20. S2,S3 contacts are used for scenes or associations

Z-Way HCL-HC2 Yubii-HC3

None, S0

Relay (Basic), Dimmer (SwitchMultilevel)

This module has only 1 relay channel, but up to 3 buttons can be connected to this device! The first button will be used to control the relay, the other 2 you can use to associate with other devices or start scenes. You can also connect a temperature sensor to this device

Flush 2 Relays

ZMNHBD

110-240V AC, 24-30 V DC

2

2

It is possible to connect an external temperature sensor ds18b20

Z-Way HCL-HC2 Yubii-HC3

None, S0

Relay (Basic), Dimmer (SwitchMultilevel)

This device is very similar to the fibaro double relay, has a large number of configuration functions, and is compatible with a large number of controllers. And as an advantage, an external temperature sensor can be distinguished

Heatit ZM Single Relay 16A

4512671

230VAC

16A

3.6kW

1

16A

3600W

2

Scene controller, Zero - Cross, Smart start, OTA, Heat alarm

Fibaro HC3, HC3 lite, Oblo Living, Comfort Click. OpenHAB, Ilevia, Futurehome, Athom Homey

None, S0, S2‑unauthenticated, S2‑authenticated

Relay (Basic), Dimmer (SwitchMultilevel)

Heatit ZM Single Relay is a high power relay for in-wall installations that fits in an European wall box. The relay allows you to control connected devices either through your Z-Wave network or via a wired switch. The module is equipped with a 16A relay and has a scene controller functionality. The Heatit ZM Single Relay has power metering and it gives you the real time information about your power consumption. The relay can withstand a load of max. 16A/3600W at 230VAC. We recommend a contactor for loads above 13A.