RaZberry 7 Pro Z-Station Z-Wave mPCIe adaptor Works With

Congratulations on purchasing RaZberry 7 Pro! Z-Station Z-Wave & Zigbee dual-protocol Mini PCI Express adaptor

Your RaZberry Z-Station Z-Wave mPCIe adaptor works with different Home Automation software. Our support will help you setting up your RaZberry 7 Pro with the software of your choice.

Z-Wave.Me Z-Way

Z-Way is a full-featured home automation controller software supporting Z-Wave, Zigbee and EnOcean.

Z-Way can run on Raspberry Pi, on a Linux or Windows-based PC, in a Docker or as a Home Assistant add-on.

Follow the installation guide to get started.

Home Assistant

Your RaZberry 7 Pro Z-Station Z-Wave mPCIe adaptor can run with the Home Assistant's native Z-Wave engine called ZWaveJS. It is also possible to use integration with Z-Way: Home Assistant OS + Z-Way, Home Assistant Supervised + Z-Way, Home Assistant Core + Z-Way.

openHAB

There are two ways to connect RaZberry 7 Pro Z-Station Z-Wave mPCIe adaptor with openHAB: using the native openHAB's Z-Wave binding or using a connector to Z-Way.

Node-RED

Integration with Node-RED is done via a Z-Way connector. Read this article to get a step-by-step guide on installing Z-Way and setting up the Z-Way connector.